Views: 0 Author: Site Editor Publish Time: 2021-11-08 Origin: Site
The installation method of closet accessories plays an important role in the overall installation design of the closet, so how to install the wardrobe in a correct position and how to choose accessories is very important for our subsequent use of the closet.
Here is the content list:
Closet wall cabinet placement and accessories parameters
Selection of closet panel and other parts
Closet wall cabinets are used to store clothes and should be installed in larger bedrooms. The wall cabinet should be installed against the inner wall and should not be located in direct sunlight.
The doors of closet wall cabinets generally use sliding doors, commonly known as sliding door wall cabinets.
Closet sliding door wall cabinets are available in the top-to-top type and the top-to-top type. The top wall cabinet is from the ground to the bottom of the ceiling, with the upper cabinet attached.
The widths of closet sliding door wall cabinets are 1200, 1800, 1900, 2400, 2500, 3100mm. 1200mm has two doors; 1800mm has 3 doors; 1900mm has two doors and fixed leaves on both sides; 2400mm has 4 doors; 2500mm has 3 doors and fixed leaves on both sides; 3100mm has 4 doors and fixed fans on both sides.
The height less than the closet top wall cabinet is 1960 and 2100mm. In addition to the height of the top cabinet, the height of the top wall cabinet is also 1960 and 2100mm.
The depth of closet wall cabinets is generally 650mm.
Closet sliding door wall cabinet is composed of sliding door, wall cabinet bottom plate, wall cabinet back panel, wall cabinet side panel, upper cabinet bottom plate, upper cabinet door leaf, fixed fan, plate mouth plate, face, and so on. Clothes rails and shelves are installed in the cabinet.
The closet sliding door is composed of 18×35mm wooden keel nailed on both sides of three splints, and 12×24mm beading is nailed around the door. The upper side of the door leaf is equipped with a pulley and a flange is left (or the upper side is left with a flange and the lower side is equipped with a pulley).
The bottom plate of the closet wall cabinet is made of a 20mm thick plank, the bottom plate should be 120mm from the ground, and the base plate is made of bricks to form a skirting platform. The skirting board is in the same room.
The back panel of the closet wall cabinet is composed of 17×45mm wooden keel nailed three plywood on one side. The wall of the back panel should be painted with a waterproof coating or moisture-proof treatment.
Closet wall cabinet side panels are made of 17×45 wooden keel nailed three plywood on one side. The wall installed on the side panels should be painted with waterproof paint or moisture-proof treatment.
The bottom plate of the upper cabinet is made of 25mm thick wood.
The closet upper cabinet door leaf is composed of 18×35mm wooden keel side nails and three splints. The closet door leaf is nailed with 12×24mm beading around the door leaf, and the upper side of the door leaf is left with a flange.
The closet fixed fan is composed of three splints nailed on both sides of the 18×35mm wooden keel.
The closet cabinet opening board is made of 20mm thick wood, installed on the outside of the sliding door pulley of the closet and the outer opening of the sidewall of the closet.
The closet uses 15×42mm wooden face strips to install on the top and both sides of the wall cabinet.
The clothes rail can be wooden poles, stainless steel poles, etc. The clothes rail is about 1.6m away from the bottom of the cabinet.
The closet shelf is composed of 12×24mm wooden keel nailed on both sides of five splints, and the periphery is nailed with 12×18mm layering. The shelf is installed in the side cabinet inside the fixed fan.
Rosen is based on providing you with the most professional, high-quality, cost-effective customized closet service. From the closet's initial raw material procurement and production to container transportation, we strictly control every processing step to eliminating your concerns about quality.