The installation of the gigantic pullout basket can be categorized as single-door installation and double-door installation
The gigantic pullout basket is divided into nine parts. Firstly, let’s connect all components of the gigantic pullout basket with screwdrivers.
In the next step, we will measure the internal dimensions of the pantry and the width of the slide
Calculate the sideline position of the slides on the left and right sides when the slides are in the middle. Go in 70MM forward from the front side to mark the positioning line and you can secure the slides on the bottom panels of the cabinet with screws.
The next step is to secure the sliding flutes on top panel. Slide the flutes in the top panel and go in 180MM from the front side and secure it.
Then, we can install the accessories on the door panels
Firstly, attach the small pullout basket onto mounting of the basket frame and measure the width.
Then, measure 70MM forward from the hinge of the door panels and mark a line to get ready for installing the mounting of the basket frame.
Install the second mounting of the basket frame as the above mentions.
Go up 70MM from the bottom of the door panels to mark the positioning line for securing parts of the first mounting of the basket frame and tighten the securing components of the first mounting of the basket frame. The same method applied to the second.
Having finished this work, use the upper and lower jointing parts to connect the small pullout basket on the door panels with the large pullout basket in the cabinet body.
Then, open the gigantic pullout basket to check out if it slides smoothly. Install the two parts of the pullout basket and assemble the decorative covers of the slides at the bottom of the pullout basket. The assembly of the gigantic pullout basket is completed.
Installation of the small basket
There are various kinds of small basket, which are installed in base cabinets and easy-reach cabinets.
A small basket consists of three parts. Firstly, let’s connect the internal with external frames of the basket.
Use tape to measure dimensions of the two parts. Go in 440MM and mark the vertical positioning line on the bottom panels. If the door is opened from the left, go in 240MM from the left side panel to mark transverse line. Install the internal frame. Place the internal frame on the bottom panel of the cabinet and position it according to the positioning line. Tighten with screws.
Then, level the front of the external frame with the side panel. Place it on the bottom panel and secure it onto the side panels of the easy-reach cabinet with screws.
Having installed the two parts, pull out the small basket and joint the two parts with the pointing parts.
Then, we can install door panels. Before installation, we should use tape to measure the dimensions of the upper and lower jointers of the door panels.
Use this measured dimension to mark the positioning line on the door panels.
Disassemble the parts from the door panel combo and install it on the door panels.
After installation, joint the two parts and secure with screws.
After securing the door panels, adjust the door panels by adjusting the door panel combo.
In the end, place the baskets onto the two parts. The installation of the small basket pantry is completed.
Contact person: Sum Landy
ADD: Room 538,Unit C,Jewel Center No 16 Kangyuan Road,Hangzhou ,China.310015