Spray Green Lacquer Kitchen Cabinets
The paint cupboard is a new type of cabinet with full paint film, no discoloration, no peeling, abrasion, scrape, and environmental protection. Most of the lacquer kitchen cabinet produced by standard manufacturers are generally non-toxic, environmentally friendly and beautiful.
|Cabinet type||Spray Green Lacquer Kitchen Cabinets|
|Door panel||22 mm / 18 mm MDF board free handle design paint ( lacuqer / two pack ) finish ;|
All door panel use 45 edge cutting to pull out .
Any paint color can be available .
|Cabinet box||16/18mm plywood with birch veneer painting finish .|
16/18mm plywood with melamine finish .
16/18mm chipboard (particle board ) with melamine finish .
|Door model||18 mm / 22 mm 45 degree edge cutting door panel .|
|Door edge seam||The same as door panel surface .|
|Hardware||BLUM / DTC / Hettich / Grasshopper/or other hardware brand|
|MOQ||1 set kitchen cabinet|
|Package||Flat package or Assembly package which depends on customer .|
|Production time||40-50 days for normal order .|
|Delivery port||Shanghai Or Ningbo .|
|Optional Items||Counter tops / Sink / Faucet / any other kitchen accessories etc .Which can be select from accessories catalogue .|
|Warranty period||10 years after installation without man-made damage .|
|Payment terms||Small orders : 50% of amount as deposit ,balance before loading .|
Big orders :30-40% as deposit ,5% of amount as project quality guarantee .
|After service||All things will be ship by air if find some fixtures missing during installation .|
We offer all cabinet & hardware 10 years warranty .
|Main Market||Oceania / North America / Middle East / North Euro|
The Glass Door Kitchen Cabinets
Install the glass door leaf upper and lower door clamps: Install the upper and lower metal door clamps on the upper and lower ends of the glass door leaf, and measure the height of the door leaf. If the upper and lower edges of the door leaf are more than the specified value from the horizontal frame of the door and the ground, the height of the door is not enough. The wooden splint can be placed at the bottom of the glass in the lower door clamp.
Fixed glass door upper and lower door clamps: After setting the height of the door leaf, insert the small wooden strips at the same time in the gap between the thick glass and the metal upper and lower door clamps, tap the solid, then in the small wooden strip, thick glass, door clamp Injecting glass glue into the gap between them.
Positioning and installation of the door leaf: firstly adjust the positioning pin on the beam of the door frame with its own adjusting screw to the plane of the beam 2mm; then erect the glass door leaf, and align the hole of the rotating pin connector in the lower door clamp of the door leaf. The spring rotates the pin shaft and rotates the door leaf to insert the hole into the pin shaft; initially, the door leaf is rotated 900 so as to be at right angles to the door frame beam, and the hole of the rotating connecting member in the door leaf door clamp is aligned with the position on the door frame beam. Pin, adjust the adjusting screw of the positioning pin, insert the positioning pin into the hole about 15mm.
Install the glass door handle; the handle hole of the full glass door is generally processed when cutting the glass. The handle connection part should not be too tight when inserted into the hole, and should be slightly loose; if the insertion is too loose, it can be wrapped in the insertion part. Soft tape. Before installation, apply a little glass glue to the part where the handle is inserted into the glass. When the handle is assembled, the root is tightly attached to the glass and then tighten the fixing screw to ensure that the handle is not loose.