Because kitchen cabinet manufacturers perform different manufacturing processes and standards, kitchen cabinets and countertops have slightly different structures. Therefore, in order to ensure the success rate and service life of countertop installations, it is recommended that you contact the original kitchen cabinet manufacturer for repair and replacement. .
Before installing the new station, the appliances and hardware placed on the floor and in the cabinet should be removed from the outside, such as drawers and sliding rail hardware, door panels and hinge hardware, ovens, refrigerators, and dishwashers.
Then, the hoods, water heaters, and other electrical appliances installed on the walls should be packaged and sealed so as to prevent unnecessary dust from entering the appliances and hardware due to the dust generated by the on-site operations such as surface glue, hole, sanding, polishing, and waxing.
In addition, the newly-changed countertop should not be used immediately. Wait at least 24 hours until the adhesive and glass glue are completely dried and cured.
If you want to replace the old artificial stone countertops with stainless steel countertops, this can be done, but first of all depends on whether the stainless steel countertops are applied to the structure of the home kitchen and the layout of the cabinets.
Due to the limitations of stainless steel materials and manufacturing processes, especially in the corners and splicing locations, there is no effective processing method, so seamless splicing cannot be done. Stainless steel countertops are most suitable for the layout of kitchen cabinets in a line.
In addition, the exchange of tabletops between different materials must fully consider the issues such as the front edge of the table top, the edge of the back edge, the corners, and the seams.
Due to its strong styling ability, the artificial stone material can be seamlessly spliced on the cutting edge and edge of the trailing edge to achieve a seamless effect; while quartz stone and granite are rich in hardness and are not as rich as man-made stone. The process cannot be seamlessly stitched.
Contact person: Sum Landy
ADD: Room 538,Unit C,Jewel Center No 16 Kangyuan Road,Hangzhou ,China.310015